24th World Scout Jamboree

Published 2019-08-04 on Cara's Blog - Permalink

This July, I had the wonderful opportunity to be a part of the Boy Scouts of America’s 24th World Scout Jamboree contingent. For two weeks, I camped out with 50,000 other scouts, scouters, and staff from more than 160 countries. It was a wonderful experience, and I thought I’d kick off the new blog by writing about it. I don’t have many pictures, which will hopefully not set a trend for the rest of the travel posts here.

The Arrival

The trip started off with a 14 hour bus ride from the Warwick, RI Scout Shop at 5 AM, to the Ruby Welcome Center in Glen Jean, WV. The ride was not memorable, I mostly watched YouTube and Netflix. I managed to catch some shut-eye after lunch, which tided me over from Maryland into West Virginia. We got into the Summit at around 6:30 in the evening, with plenty of time to set up my tent and figure out where we were. I was in campsite C101, which was fairly close to everything except Basecamps A and B.

The next day, the US contingent was supposed to serve as “ambassadors” to the incoming international troops. My troop helped all those incoming units get their rain flies set up, organize their tents, and otherwise get settled in. It rained a bit, which is why we prioritized the rain flies. At the end of the day, at least three staff members came down to personally thank our troop for our help that day.

Program

Tuesday, the 22nd. Program opened for the first time that day, and I made a beeline for the Scott Summit Center, which is where most of the trading happened. On that day, I didn’t end up trading anything, but I did meet some people. The next day, the 23rd, I hit the trading post. A JOTA/JOTI (Jamboree on the Air/Jamboree on the Internet) neckerchief was about $16, so I got one of those and two IST (International Service Team) Council Service Patches.

Skipping ahead to Saturday, the 27th, I went zip lining for the first time in my life, which was amazing. I was a bit scared at first, I’ve never been very fond of heights,  but it was all very safe and the staff were well trained. That same day, I watched a weather balloon launch from the NA1WJ tent, which is currently tracking just outside of Morocco. That event, along with near-daily visits to the NA1WJ event, is what’s motivating me to advance from my Technician class to a General class amateur license.

Tuesday, July 30th. Whitewater rafting day. It started off as a nice day, my group got through some class 5 rapids on the New River, (beautiful place by the way,) and I almost fell off the boat. About 15 minutes after leaving the boats and getting on the bus back to the Summit, it started to rain. Soon after I left the bus, standing right next to the Basecamp D Tower, where did lightning strike? That’s right, the Basecamp D Tower. The torrential rain kept up for about half an hour before clearing up to be a nice sunny day.

On Wednesday, the final Basecamp Bash in C was cut short by three separate Lightning Alerts. We were all rushed under the pavilion and held there for at least an hour and a half. We eventually got back to the site at around 11 PM, only to find that lightning had struck a tree about 200 feet from my site. Nothing caught fire, but it was still alarming.

Thursday, the closing show. Hoo boy, if I had known what $12m worth of equipment could do for a show. There was so much going on and two talented acts. Special appearances included Pentatonix and Light Balance, which won the Golden Buzzer on AGT Season 12. It culminated in a 30 minute long laser/pyrotechnic show, the first time I’ve ever seen a group of people rave to the “Tetris” theme.

Conclusion

The World Scout Jamboree is something I’ll remember for years to come. It was two weeks of fun and international bonding, even with the long thunderstorms and oppressive heat. The Jamboree emphasized what needs to be done in order to truly improve our world. That’s why Scouting is important. That’s why I believe that World Scouting is crucial to the long term survival of our species and our planet. I’ll update this post with pictures of the patches and neckerchiefs I got soon.


Articles from my webring

Clippy: Deprecating `feature = "cargo-clippy"`

Since Clippy v0.0.97 and before it was shipped with rustup, Clippy implicitly added a feature = "cargo-clippy" config1 when linting your code with cargo clippy. Back in the day (2016) this was necessary to allow, warn or deny Clippy lints using attrib…

via Rust Blog February 28, 2024

Status update, February 2024

Hi! February is FOSDEM month, and as usual I’ve come to Brussels to meet with a lot of other FOSS developers and exchange ideas. I like to navigate between the buildings and along the hallways to find nice people to discuss with. This edition I’ve been invol…

via emersion February 20, 2024

Why Prusa is floundering, and how you can avoid their fate

Prusa is a 3D printer manufacturer which has a long history of being admired by the 3D printing community for high quality, open source printers. They have been struggling as of late, and came under criticism for making the firmware of their Mk4 printer non-…

via Drew DeVault's blog December 26, 2023

Generated by openring